CIPET JEE 2019: Application, Exam Date & Pattern, Syllabus, EligibilityCentral Institute of Plastic Engineering and Technology, Chennai was established in the year 1968 and is affiliated to Anna University, Chennai. CIPET conducts its own Joint Entrance Examination every year to grant admission to the interested candidates in various disciplines of Engineering. It is a University level examination regulated by the CIPET.

The variegated Diploma courses offered by the Central Institute of Plastic Engineering and Technology 2019 are as follows –

  1. Postgraduate Diploma in Plastic processing and testing (PGD – PPT)
  2. Postgraduate Diploma in Plastic testing and quality management (PGD – PTQM)
  3. Post Diploma in Plastic mold design with CAD/CAM (PD – PMD with CAD/CAM)
  4. Diploma in Plastic mold technology (DPMT)
  5. Diploma in Plastic Technology (DPT).

CIPET JEE 2019 Application Form Details:

The Central Institute of Plastic Engineering & Technology will be releasing the online application forms at the official website, where the direct link will be provided to the students. The applicants are required to fill the application form via online/offline mode.

Here, the steps are mentioned as to how the applicants have to fill the application form –

  1. The application form will get started in the mid of February 2019. Candidates are required to apply within the stipulated time frame.
  2. The direct link for applying online will be activated.
  3. There the candidates need to fill in all the details asked – Name, permanent address, contact information, academic qualifications, etc
  4. Next is payment of application fees which can be either through online or offline mode. The fees structure for different category candidates are as under :
Category Application fees
General/OBC Rs.250
SC/ST Rs.50
Candidates belonging to regions of Assam, Mizoram, Tripura, Meghalaya, Sikkim, Manipal, Andhra Pradesh, and Nagaland No application fees

Application fees online mode – Net banking, credit/debit card.

Application fees offline mode – Demand Draft, drawn in favor of CIPET payable at Bhubaneswar.

5. Candidates must take out a printout of the successfully submitted application form.

And along with the application form the following documents need to be attached –

  • DOB certificate
  • Copies of Class X and XII mark sheet, degree/certificates (self-attested)
  • Attested certificate of the community for SC/ST/OBC (NCL) candidates.
  • Residential proof of candidates from the Northeastern region (if applicable)
  • Self-attested Medical certificate for physically handicapped candidates.
  • Postcard duly filled with a complete specific address for future acknowledgment.

In case of the offline application form, the application form along with the prescribed documents and Demand Draft needs to be sent via Speed Post/courier to the given address –

Director (Academic),
CIPET Head office, Guindy, Chennai – 600032.

CIPET JEE 2019 Eligibility Criteria:

The candidates those who will be satisfying all the eligibility criteria for the courses offered by the Central Institute of Plastic Engineering and Technology 2019 will only be considered appropriate for the admission. However, the eligibility rules are different for different courses, it is advised that the candidates go through the listed criteria carefully and act accordingly.

To be eligible for CIPET 2019, the eligibility criteria are as follows –

Courses Eligibility Criteria
Postgraduate diploma in Plastic processing and testing (PGD – PPT) A bachelor’s degree in science subject with chemistry being compulsory.

The age limit for this course is 25 years.

There is a 5 years relaxation for SC/ST and candidates from the Northeastern region.

Postgraduate diploma in Plastic testing and quality management (PGD -PTQM) A bachelor’s degree in any science subject with Mathematics, physics, and chemistry being compulsory.

The age limit for this course is 25 years.

There is a 5 year age relaxation for SC/ST and candidates from the Northeastern region.

M.E/ (Plastic Engineering and Technology) A bachelor’s degree (B.E/ in engineering) in Mechanical/Chemical/Production/Polymer plastic Engineering/Technology


Masters in Polymer Science/Chemistry with polymer specialization.

The age limit for this course is 21years as of 31st July 2019.

There are a 5 years age relaxation for SC/ST and candidates from the Northeastern region. – PNT B.E/B.Tech (4 years) in Mechanical/Plastics Engineering/Technology/Polymer/Chemical


Masters in Polymer Science/Physics/Chemistry.

The candidate should have qualified the GATE exam.

M.Sc – PS The candidates should be a graduate in science with a degree in Chemical/Industrial Chemistry/Polymer Science/Applied chemistry/Chemistry as one of the major subjects.
M.Sc (Technology) The candidate should have qualified Class XII with mathematics, physics & chemistry as compulsory subjects.

The age limit for this course is 21 years as on 31st July 2019.

There are a 5 years age relaxation for SC/ST and candidates from the Northeastern region.

Note – Candidates must ensure their eligibility before applying for CIPET 2019. If any candidate found ineligible and still applying for a particular course, his/her candidature will be canceled by the University.

CIPET JEE 2019 Exam Dates:

The Central Institute of Plastic Engineering and Technology Joint Entrance Examination has announced the tentative schedule of the upcoming examination to be held in 2019. All the candidates who are appearing for the examination must understand the important dates provided. So, following is the complete schedule for Candidates –

Examination Events Tentative Dates
Application form commencement 4th week of April 2019
Last date of applying a 1st week of June,2019
Issuance of Admit cards 1st week of June,2019
Entrance examination 1st week of June,2019
Results declaration 2nd – 3rd week of July,2019
Issuance of call letter to the selected candidates for counselling 2nd week of July,2019
Counselling process 3rd week of July,2019
Session starts 1st week of August,2019

CIPET JEE 2019 Exam Pattern:

Details of Examination Particulars
Mode Offline
Time duration Prelims – 3 hours (180 minutes)
Mains – 2 hours (120 minutes)
Total number of questions 100
Question type Objective
Subjects As per academic qualifications and GK.

CIPET JEE 2019 Syllabus:

The Central Institute of Plastic Engineering and Technology Joint Entrance Examination has prescribed the syllabus of 2019 Examination for all the candidates appearing in the entrance exam. Candidates must go through the CIPET 2019 syllabus attentively and know all the topics that needs to be covered and studied. The syllabus will be entirely based on their bachelor’s degree course.

Syllabus for Physics –

  • Physical world and measurement
  • Kinematics
  • Laws of motion
  • Work, energy & Power
  • Motion of system of particles and Rigi body
  • Gravitation
  • Thermal and Chemical effects of currents
  • Thermodynamics
  • Solids and semiconductor devices
  • Oscillation and waves
  • Electrostatistics
  • Current electricity
  • Ray Optics and optical instruments
  • Electronic devices
  • Dual nature of matter and radiation
  • Electromagnetic waves
  • Rotational motion
  • Description of motion in one, two and three   dimensions
  • Electrons and Protons
  • Atoms, molecules and Nuclei

Syllabus for Mathematics –

  • Sets, relations and function
  • Trignometry and inverse trigonometric functions
  • Principle of mathematical Induction
  • Complex numbers & quadratic equation
  • Matrices and determinants
  • Statistics & Probability
  • Mathematical reasoning
  • Sequence and series
  • Integral calculus and application of integrals
  • Differential equations and differential calculus
  • Vector algebra
  • Discrete Mathematics
  • Linear Inequation and linear programming
  • Analytical geometry
  • Probability distribution

Syllabus for Chemistry –

  • Transition elements (3rd series)
  • Solutions
  • Preparation, properties and reactions of alkenes   and alkynes
  • Reactions of benzene
  • General topics
  • Principles of qualitative analysis
  • Surface Chemistry
  • Nuclear Chemistry
  • Practical organic Chemistry
  • Phenols
  • Properties and uses of some important polymers
  • Extractive metallurgy
  • Gaseous and Liquid states
  • Carbohydrates
  • Energetics
  • Amino acid and peptides
  • Chemical Kinetics
  • Atomic structure and Chemical bonding

CIPET JEE 2019 Preparation Tips:

In order to crack CIPET JEE 2019, the candidates should keep in mind few important tips and tricks. Every Entrance exam needs a proper planning and strategy, without a schedule it becomes difficult for students to score good . Firstly, Candidates needs to make a detailed note of all the topics included in the Central Institute of Plastic Engineering and Technology Joint Entrance Examination 2019 and should prepare every topic thoroughly. Knowing the syllabus will help students prepare efficiently.

  1. The students should give at their most 8-10 hours of self study every day.
  2. Make a schedule of the topics to be covered in a particular time and study accordingly.
  3. Strictly follow the daily routine.
  4. Avoid procrastination, Try to stay focused and motivated.
  5. Keep oneself updated about every pros and cons of the examination, though there is no negative marking which is ofcourse a plus point but still the students should be very careful while answering.
  6. Also students can watch YouTube videos on preparation if it’s being difficult for them to understand books and notes.
  7. Time management is the key to these state level exams, they should be well known about investing their time.
  8. Practice as many questions as you can to get the perfect grip over the particular subject/topyic.
  9. Lastly, analyze your performance regularly.